Brand: ROCKLER
Model: ROC56769
Rockler - 1'' Masking Tape Dispenser
Whether you use masking tape to clamp thin moldings, as a makeshift depth-stop for your drill or to shim out the angle on one of your jigs, this tape dispenser will keep it close at hand, with no need to pick at the roll to find the loose end. U..
R 1,130.05
Ex Tax:R 982.65
2-3 Days
Brand: TORK CRAFT
Model: TCIM90005
1'F X 3/4'M IMPACT ADAPTOR (BALL TYPE)..
R 401.64
Ex Tax:R 349.25
Brand: ROCKLER
Model: ROC34974
Rockler - Box Joint Cauls
Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Simply align the pressure points with box joint fingers and tighten in place with one or more Rockler 1'' x 15' Band Clamp (#58432,..
R 500.88
Ex Tax:R 435.55
Brand: AIRCRAFT
Model: AT0012-31
1/2' DRILL CHUCK FOR AIR DRILL 12.5mm REVERSABLE 550RPM (1/2')..
R 110.57
Ex Tax:R 96.15
Brand: TORK CRAFT
Model: TCIM90004
1/2'F X 1'M IMPACT ADAPTOR (BALL TYPE)..
R 250.76
Ex Tax:R 218.05
2-3 Days
Brand: TORK CRAFT
Model: TCIM90002
1/2'F X 3/4'M IMPACT ADAPTOR (BALL TYPE)..
R 176.53
Ex Tax:R 153.50
Brand: TORK CRAFT
Model: TCIM90001
1/2'F X 3/8'M IMPACT ADAPTOR (BALL TYPE)..
R 90.62
Ex Tax:R 78.80
Brand: ROCKLER
Model: ROC33792
Rockler - Box Joint Cauls
Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Simply align the pressure points with box joint fingers and tighten in place with one or more Rockler 1'' x 15' Band Clamp (#58432,..
R 500.88
Ex Tax:R 435.55
Brand: TORK CRAFT
Model: MM10
Tie on polishing wool buff
Diameter: Ø250mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff i..
R 275.25
Ex Tax:R 239.35
2-3 Days
Brand: TORK CRAFT
Model: TCIM91005
TorkCraft - Drive impact Extension Bar
Size: 1/2 Inch
Width 10 Inch
Application:
The Tork Craft Impact extension bar is used to gain access to fasteners in locations that would otherwise be difficult to reach, full chamfer at drive opening for easy engagement with drive tools
..
R 239.09
Ex Tax:R 207.90